Short answer: neither is better everywhere. HomeAdvisor puts steel framing at about $2 to $4 per square foot versus roughly $1 to $5 for wood, so cost is often close and swings with lumber prices. Wood is the standard for load-bearing residential framing. Light-gauge metal studs shine for non-structural walls, basements and commercial interiors. We frame with both, and here’s how we decide.
Side-by-Side Comparison
| Wood studs | Metal (light-gauge steel) studs | |
|---|---|---|
| Typical framing cost | About $1 – $5 per sq ft | About $2 – $4 per sq ft |
| Load-bearing walls | Standard choice in homes | Needs heavier gauge and engineering |
| Moisture & rot | Can rot or mold if wet | Won’t rot; can rust if left wet |
| Straightness | Can warp, twist or shrink | Perfectly straight and consistent |
| Fire | Combustible | Non-combustible |
| Hanging cabinets & TVs | Easy, screw anywhere | Needs planned wood blocking |
| Common use | Additions, structural walls, most homes | Basements, partitions, commercial fit-outs |
Cost ranges from HomeAdvisor. Prices move with lumber and steel markets.
When We Use Wood
- Home additions and any load-bearing wall
- Walls that will carry heavy cabinets, shelving or wall-mounted TVs without a lot of planning
- Remodels where new walls tie into existing wood framing
When We Use Metal
- Basement perimeter walls and partitions, where moisture and concrete contact are a concern
- Commercial interiors and tenant fit-outs, where codes often call for non-combustible framing
- Long, straight walls and ceilings where flatness matters for the finish
- Soffits and bulkheads around ducts and beams
What About Cost Over Time?
Material price is only part of it. Metal studs are lighter and perfectly straight, which can speed up drywall and reduce callbacks for nail pops and cracked seams. Wood is faster for crews used to it and easier to modify later. In a damp basement, avoiding rot and mold matters more than a small difference in material cost.
Need Framing Done Right?
Cost guides get you in the ballpark. A site visit gets you a real number. Park Interiors is a licensed and insured general contractor building wood and metal framing across Burlington, Essex, Williston, Jericho, Underhill and the rest of Chittenden County. Call 802-777-0951 or request a free estimate online.



